News Update on Corrosion Inhibition Research: Sep – 2019

Double Layer Capacitance of Iron and Corrosion Inhibition with Polymethylene Diamines

The impact of α,ω‐polymethylenediamines Formula on the corrosion of iron in deaerated Formula was investigated by polarization measurements and quantitative chemical analysis of resolution. The sorption of those inhibitors at the metal/solution interface was monitored by activity of the double layer capacitance victimisation the only pulse methodology. 1,3‐propanediamine was found to be a far better matter than ethylenediamine, however no more improvement in per cent inhibition resulted upon increasing the chain length from Formula . inflated matter potency for organic compound chains longer than eight carbon atoms was attributed to the concomitant shriveled solubility. On a relative solubility basis, the C6‐diamine was additional economical than the C12‐diamine, though each inhibitors created ninetieth inhibition at a reduced concentration of zero.1. [1]

Quantum chemical approach of corrosion inhibition

An examination of quantum chemical and corrosion inhibition studies were created to ascertain if any clear links exist between the 2. The results of quantum chemical calculations and experimental efficiencies of inhibitors were subjected to correlation analysis. A composite index of a number of the key quantum chemical parameters was made so as to characterize the inhibition performance of the tested molecules. [2]

Corrosion inhibition of some metals using lawsonia extract

The liquid extract of the leaves of henna (lawsonia) is tested as corrosion matter of C-steel, nickel and metallic element in acidic, neutral and alcalescent solutions, mistreatment the polarization technique. it had been found that the extract acts as an honest corrosion matter for the 3 tested electrodes altogether tested media. The inhibition potency will increase because the superimposed concentration of extract is multiplied. The degree of inhibition depends on the character of metal and therefore the variety of the medium. For C-steel and nickel, the inhibition potency will increase within the order: alcalescent < neutral < acid, whereas within the case of metallic element it will increase within the order: acid < alcalescent < neutral. The extract acts as a mixed matter. [3]

Epoxy pre-polymers as new and effective materials for corrosion inhibition of carbon steel in acidic medium: Computational and experimental studies

Present study is meant for the synthesis, characterization and corrosion inhibition behavior of 2 organic compound aromatic epoxy pre-polymers (DAEPs) specifically, N1,N1,N2,N2-tetrakis (oxiran-2-ylmethyl) benzene-1,2-diamine (DAEP1) and 4-methyl-N1,N1,N2,N2-tetrakis (oxiran-2-ylmethyl) benzene-1,2-diamine (DAEP2) for steel corrosion in acidic medium. Synthesized DAEPs were characterised mistreatment spectral (Nuclear resonance (1H NMR) and Fourier remodel infrared-attenuated total reflection (FTIR-ATR)) techniques. consistency studies allotted at four totally different temperatures (20–80 °C) increase in temperature causes vital reduction in their viscosities. [4]

Adsorption and Corrosion Inhibition of Epiphyllum oxypetalum Leaf Extract on Aluminum Alloy AA5052

Aim: The corrosion inhibition mechanism of aluminum Alloy AA5052 has been studied in acidic resolution. The study used measurement and chemical science resistance spectrum analysis to verify the inhibition efficaciousness of orchid cactus Oxypetalum Leaf Extract At Varied Concentrations.

Study Design: Laboratory analysis was conducted at a most exposure time of 9 (9) hours.

Place and length of Study: The analysis was dispensed at Material Science cluster laboratory, Abia State Polytechnics, Aba Abia State, African country between might 2018 and July 2018. [5]

Reference

[1] McCafferty, E. and Hackerman, N., 1972. Double layer capacitance of iron and corrosion inhibition with polymethylene diamines. Journal of the Electrochemical Society, 119(2), pp.146-154. (Web Link)

[2] Khalil, N., 2003. Quantum chemical approach of corrosion inhibition. Electrochimica Acta, 48(18), pp.2635-2640. (Web Link)

[3] El-Etre, A.Y., Abdallah, M. and El-Tantawy, Z.E., 2005. Corrosion inhibition of some metals using lawsonia extract. Corrosion science, 47(2), pp.385-395. (Web Link)

[4] Epoxy pre-polymers as new and effective materials for corrosion inhibition of carbon steel in acidic medium: Computational and experimental studies
Omar Dagdag, Zaki Safi, Rachid Hsissou, Hamid Erramli, Mehdi El Bouchti, Nuha Wazzan, Lei Guo, Chandrabhan Verma, E. E. Ebenso & Ahmed El Harfi
Scientific Reportsvolume 9, Article number: 11715 (2019) (Web Link)

[5] Nwosu, F. O., Israel, O. O. and Osarolube, E. (2018) “Adsorption and Corrosion Inhibition of Epiphyllum oxypetalum Leaf Extract on Aluminum Alloy AA5052”, Journal of Materials Science Research and Reviews, 1(4), (Accessed: 5September2019). (Web Link)

Leave a Reply

Your email address will not be published. Required fields are marked *