Latest Research on Electrical Properties: Oct – 2019

Mechanical and electrical properties of a MWNT/epoxy composite

Multi-walled carbon nanotube/epoxy rosin composites are fictional. By selecting AN over-aged hardener, comparatively soft and ductile matrix, a rubbery epoxy glue, has been obtained. This created potential to judge the result of carbon nanotube addition on the complete stress-strain curve up to high strain level. The mechanical and electrical properties of the composite with totally different weight percentages of nanotubes are investigated. The Young’s modulus and therefore the yield strength are doubled and quadrupled for composites with severally one and four wt.% nanotubes, compared to the pure rosin matrix samples. conduction measurements on the composite samples showed that the insulator-to-conductor transition materialized for carbon nanotube concentration between zero.5% and one wt.%. [1]

Electrical Properties of Rocks and Minerals

The electrical properties of a cloth embody the first properties of conduction and material constant, and plenty of secondary properties like the coefficients that verify the speed of modification of the first properties with such parameters as frequency, temperature. the very fact that a lot of rocks and minerals don’t seem to be characterised by a selected price for the assorted electrical properties even underneath normal conditions makes it troublesome to tabulate a meaty set of numbers for these properties. The supply of elicited polarization lies in chemical reactions that should occur once electrical current flows between associate degree electrolytic answer within the pore areas of a rock and an electronically conductive chemical compound mineral obstruction these pores. physical phenomenon in semiconductors is by movement of electrons through the fabric, however the conduction is way not up to that discovered in true metals. Native metals occur occasionally in nature, however such occurrences are often of goodish economic importance. [2]

Electrical properties of bulk ZnO

Large-diameter (2-inch), n-type ZnO boules grownup by a brand new vapor-phase transport technique were investigated by the temperature-dependent Hall-effect technique. The 300-K Hall carrier concentration and quality were regarding half dozen × 1016 cm−3 and 205 cm2 V−1 s−1, severally, and therefore the peak quality (at fifty K) was regarding 2000 cm2 V−1 s−1, akin to the best values rumored within the past for ZnO. The dominant donor had a amount of regarding one × 1017 cm−3 associated an energy of about sixty meV, near to the expected hydrogenic worth, whereas the full acceptor concentration was abundant lower, regarding a pair of × 1015 cm−3. Photoluminescence measurements ensure the prime quality of the fabric. [3]

Conductive silicone elastomers electrodes processable by screen printing

Conductive inks consisting of graphene and lampblack conductive  fillers into a polydimethylsiloxane (PDMS) matrix, which may be processed into skinny films by screen printing ar developed. The influence of filler composition and content on mechanical and electrical properties of the conductive  composites is investigated. the simplest composites were evaluated as conductor material for material stuff actuators and for electricity sensors. With increasing filler content, the electrical properties of the ensuing composites of carbon nanoplates (GNPs) or a binary mixture of GNPs and lampblack (CB) with PDMS (Mw = 139 kg/mol) ar increased. Hence, PDMS composites stuffed with GNPs (42 wt.%) or a binary mixture of GNPs/CB (300/150 magnitude relation, 30 wt.% of total filler loading) exhibited constant contact resistance values of zero.5 and five Ω determined in life-cycle check, severally, so rendering them appropriate as conductor materials for piezosensors. [4]

Electrical Properties of Electrodeposited Lead Selenide (PbSe) Thin Films

PbSe skinny films were electrodeposited onto ITO substrate with variation of deposition voltage (1-5V). The deposited skinny films were characterised mistreatment the four purpose probe technique to see their electrical properties.  The sheet electrical resistance of the skinny films was found to vary from one.50 x104 (Ωm) to five.23 x one04(Ωm) and conduction vary from 1.91 x 10-5 (Ωm)-1 to seven.40×10-5(Ωm)-1, that is inside the electrical conduction vary for semiconductor. it had been ascertained that because the ratio of the incident radiation will increase the gauge boson energy increases additionally. it had been noticed  that sample N with 168nm thickness recorded the very best worth of ratio that will increase from two.424-2.643 and sample O with 164 nm thickness disclosed the very best peak all told the samples deposited. It shows that because the optical conduction of the incident radiation will increase the gauge boson energy increases. it had been ascertained that sample follows identical thread and sample O with 164nm thickness disclosed the very best peak all told the samples deposited. [5]


[1] Allaoui, A., Bai, S., Cheng, H.M. and Bai, J.B., 2002. Mechanical and electrical properties of a MWNT/epoxy composite. Composites science and technology, 62(15), (Web Link)

[2] Keller, G.V., 2017. Electrical properties of rocks and minerals. In Handbook of Physical Properties of Rocks (1982) (pp. 217-294). CRC Press. (Web Link)

[3] Look, D.C., Reynolds, D.C., Sizelove, J.R., Jones, R.L., Litton, C.W., Cantwell, G. and Harsch, W.C., 1998. Electrical properties of bulk ZnO. Solid state communications, 105(6), (Web Link)

[4] Conductive silicone elastomers electrodes processable by screen printing
Jose Enrico Q. Quinsaat, Iurii Burda, Ronny Krämer, Daniel Häfliger, Frank A. Nüesch, Mihaela Dascalu & Dorina M. Opris
Scientific Reports volume 9, Article number: 13331 (2019) (Web Link)

[5] I. Udofia, K. and I. Lucky, I. (2018) “Electrical Properties of Electrodeposited Lead Selenide (PbSe) Thin Films”, Asian Journal of Physical and Chemical Sciences, 5(4), (Web Link)

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top